To Next Page
R
Ronald PierceNov 17, 2025
Why won't my Atag DW8114XB start?
- RrussellbrandonNov 17, 2025
The Atag Dishwasher might not start because: * The Start/Stop button wasn't pressed long enough. Press and hold it until the display indicates the program has started. * The door isn't properly closed. Ensure it is securely shut. * The door lock hasn't clicked into place. Check the door lock, and if necessary, open the door, then press and hold the left navigation button and the Auto Open option button until the display flashes (about 60 seconds). Close the door again and check if the lock clicks. * A fuse or circuit breaker has tripped. Check your fuse box. * The dishwasher isn't plugged in. Make sure the plug is properly inserted into the wall socket. * The water tap is off. Ensure the water supply is turned on. * There is an overflow or leak. Inspect for any signs of wat...
General
