GB-26
09
Function of variable
input 2
(Type ..VV.. )
Setting range and allocation as for parameter
08 OFF 0123
10
Function of variable input 3
(Type ..VV.. )
Setting range and allocation as for parameter
08
OFF 0123
11 Minimum boiler return flow
temperature
OFF, ON
OFF 0123
SYSTEM Level
The parameters in this level refer to the general limiting parameters and setting values in
the heating system to be used.
PARA-
METER
Designation Setting range / Setting values
Factory
setting
Individual
setting
From
code
01
Language NL Dutch
GB English
F French
I Italian
NL 1234
02
Time programs P1 a time program is enabled
P1-P3 Three time programs enabled
P1 1234
03
Enabling of separate control
mode setting
1 Common adjustment for DHW-
/burner-circuits
2 Separate setting for each
individual heating circuit
1 1234
04 Summer shutdown OFF no function
10-30 °C
20 °C 1234
05 System frost protection OFF no function
-20...+10 °C
3 °C 0123
06 Heat demand on VI1 1 Mixed circ. 1
2 Mixed circ. 2
3 Unmixed circ.
1 0123
07 Heat demand on VI2 (Type
..VV..)
Settings see parameter 06
1 0123
08 Heat demand on VI3 (Type
..VV..)
Settings see parameter 06
1 0123
09 Climate zone -20.0.000.0°C -12 °C 0123
10 Type of building 1 light construction
2 medium construction
3 heavy construction
2 0123
11 Time for automatic exit OFF no
0,5...5 after set time
min Return to standard display
2 min 1234
12 24h cycle pump three way
valve
ON active
OFF inactive
ON 0123
13 Logical error messages OFF no display
ON Display active
OFF 0123
14 Automatic setting function OFF automatic error allocation
deactivated
ON automatic error allocation
activated
ON 0123
PARA
RESET
Resetting the parameter
settings
in dependence on access code only to
released parameters
GB
To Next Page
Loading...
Need help?
General