EasyManua.ls Logo

ATAGO PR-32a - Battery Management and Usage Conditions; Battery Warnings and Safety; Environmental and Handling Advice; Daily Instrument Maintenance

ATAGO PR-32a
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Handling of battery
WARNING
Make sure to use a specified battery or that
supplied with the instrument as an accessory.
When loading the instrument with a battery,
pay heed to the polarities of the battery.
If a battery out of the specification is used, it
may cause smoke or fire because some
batteries are different in the voltage and
polarities.
Do not heat, shortcircuit, burn a battery or
take it apart. If done so, it may cause burst or
fire.
CAUTION
Be sure to always use alkaline batteries.
When keeping or disposing a battery, protect
both poles with insulating tape, etc.
If a battery is kept or disposed as the poles
are not covered, it may cause shortcircuit,
burst or fire.
Items to be observed when using
Environmental conditions
Use the PR-32α and PR-101α where the temperature is between 5 to 40℃.
Use the PR-201α and PR-301α where the temperature is between 10 to 40℃.
Use the instrument where the humidity is below 90%RH.
Do not leave the instrument in a location exposed to direct sunlight or near a heating unit
where the temperature may rise.
Do not change the environmental temperature of the product suddenly.
Do not place the instrument in a place where it may be subject to strong vibrations.
Do not use the instrument where there is much dust.
Do not leave the instrument where the temperature is extremely low.
Do not leave the instrument in a damp place.
Do not place or drop heavy objects on the instrument.
Handling
Do not drop the instrument or subject it to any strong shock.
Daily maintenance
If the instrument becomes dirty, wipe it with a soft cloth.
Do not use benzine, paint thinner, etc. to clean the instrument.

Related product manuals