AT&T 950 User Manual

Wall mount installation
continued from page 7
3. Reverse the handset tab.
This tab holds the handset when you hang up. Hold down the
switchhook, and slide the handset tab up and out of its slot.
Turn the tab so that the end with the hook is up. Then insert
the handset tab back into its slot.
Switchhook
Handset tab
(a
©
ed
i
Ts
mar)
Vv)
2
4. Connect the short telephone line cord to a modular wall
jack and mount the telephone on the wall jack.
Make sure the short telephone line cord snaps firmly into place.
Place the telephone on the wall jack mounting studs and pull
down until it is held securely.
5. Follow steps 4-5 in Tabletop/desktop installation on page 6.

AT&T 950 Specifications

General

Brand	AT&T
Model	950
Category	Telephone
Language	English