AT&T 950 - Phone Installation Guide; Installing the Batteries

=
AS)
a
&
Ts
fo
Vv)
2
Installation
Battery installation
Before using the telephone, you should install four AA batteries
(purchased separately). You can use the phone without the batteries
to dial and receive calls using the handset, but four AA batteries are
required to power the display screen, speakerphone, Features Setup,
Program, Flash, Hold, Mute and caller ID features.
CAUTION: Always unplug the line cord before installing
A new batteries.
|. Press down on the battery compartment tabs as shown
and pull to open the battery cover.
2. Insert four new AA batteries (purchased separately)
following the polarity markings in the battery
compartment.
— Base wedge
3. Close the battery compartment cover, making sure
the cover snaps into place.