AT&T 950 User Manual

SPEAKER
Redial
The last number called from this telephone (up to 32 digits),
is stored in redial memory.
|. Lift the handset.
--- OR ---
Press (SPEAKER).
2. Press (REDIAL). The number is dialed automatically.
Q NOTE: You can erase the redial memory by
pressing (PROG), (REDIAD, in idle mode.
Flash/call waiting
If you subscribe to call waiting service with your local
telephone service provider, you can answer a new
incoming call without losing your current call.
l. While on a call, press to connect to the
new call when you receive a call-waiting signal.
2. Press again to return to the original call.
Q Notes:
1. Use to access other phone company
subscriber services, as described by your
telephone company.
2. The telephone cannot display the information if
another telephone on the same line is in use.
Make sure all extensions are on hook when not
in use.
melephone operation
Hold
Press to put a call on hold.
The CALL INFO indicator will flash slowly to indicate the
call is on hold.
To return to the call, press again.
--- OR ---
Lift the handset.
--- OR ---
Press (SPEAKER) .
--- OR ---
Pick up the call at another extension connected to
the same telephone line.

AT&T 950 Specifications

General

Brand	AT&T
Model	950
Category	Telephone
Language	English