AT&T 950 - Setting Your Home Area Code

Set home area code
You must program your area code, so your phone can properly
recognize and dial calls.
For calls within your area code
You dial: Enter in step 2: =
T _
T digits Your area code @
(phone number, no area code) T3)
10 digits o o @) cb)
(area code + telephone number) =
--- OR --- =
11 digits (+ area code + ~
telephone number) ©
g
ne
l. Press until the screen displays:
2. Use the keypad to enter your three digits of
your home area code.
3. Press to save the setting. You will see
the local area code setup screen.
Q NOTE: A home area code must be programmed to use the display
dial feature. If you try to use display dial before entering a home area
code, you will be prompted to enter the home area code. Enter the
code and press (OPTIONS).