AT&T 950 - Storing Numbers in One Touch Memory

Store a number in a one touch
location
1. Press (PROG). The screen displays ENTER
HUMBER,
2. Dial the telephone number you want to store
(up to 24 digits).
Press to store the last number dialed.
@NOTE: If the redialed number is longer than 24 digits,
you will hear an error tone if you are off hook while
storing the number. The number cannot be stored.
3. Press the one touch button for the desired
location.
--- OR ---
Press (LOWER), then press the one touch
button for the desired location. The
screen displays STORED.
Store a pause or flashina
one touch entry
Press CALL LIST (Y) twice to store a pause in the dialing
sequence (the screen displays P). Press to store a
press of the flash button (the screen displays F).
Store a call history number in a
one touch location
1. Press CALL LIST (á) or CALL LIST (¥) to scroll
through the call history.
2. Press (PROG), then press a one touch button.
_-- OR ---
Press (PROG), then press (LOWER) and a one
touch button to store the number.
2l