AT&T 950 - Reviewing One Touch Entries; Dialing Using One Touch Buttons; Deleting One Touch Entries

ZLS
REMOVE
22
Review a one touch entry
1. Press the one touch button for the entry you
want to review.
--- OR ---
Press (LOWER), then press the one touch button
for the entry you want to review.
2. Press (PROG) to return to the idle screen.
Dial a one touch number
When the phone is off hook (handset or
speakerphone):
Press the one touch button for the number you want
to call.
--- OR ---
Press (LOWER), then press the one touch button for the
number you want to call.
When the phone is on hook:
1. Press the one touch button for the number
you want to call.
--- OR ---
Press (LOWER), then press the one touch button
for the number you want to call.
2. When the number is displayed on screen, press
(DISPLAY DIAL}, The call is dialed using the
speakerphone.
Q NOTE: You can switch to the handset after dialing
begins by lifting the handset.
Delete a one touch entry
1. Follow the directions in Review a one touch
entry.
2. When the number you want to delete is
displayed, press (REMOVE). The entry is deleted.