AT&T 950 User Manual

In case of difficulty
If you have difficulty operating this phone, try the suggestions below.
For customer service, visit our website at www.telephones.att.com
or call 1 (800) 222-3111. In Canada, please call 1 (866) 288-4268.
Have the serial number, found on the underside of your phone, available
Inspect the telephone line cord connections
at the modular jack and telephone. Also
inspect the coiled handset cord connections
at both ends.
* Unplug the telephone and connect it to
another modular jack. If it still does not
work and other telephones in your home
are working, the problem is with this
> when contacting customer service. Please also retain your receipt as your
a proof of purchase.
= | To purchase accessories or replacement parts, please contact customer
Y service through the above website or telephone number.
—
=i Telephone operation
o mw
ge) Problem Solution
rs) No dial tone. + Make sure all plugs are connected properly.
Q
a)
telephone.
Problem Solution
Telephone does * Make sure the RINGER switch is not set to
not ring. OFF.
* If there are several other telephones on the
same line, try disconnecting some of the
other telephones. Having too many
telephones connected can also create
problems such as low ringer volume or
impaired sound quality during calls.
Problem Solution
Incorrect time e The local telecom provides the time of
and date on the call along with the other caller ID
incoming calls. information. Report the problem to the
telephone company. (Telephone should
show correct time after the first call) If
you do not have caller ID service, please
set the time manually.
34

AT&T 950 Specifications

General

Brand	AT&T
Model	950
Category	Telephone
Language	English