AT&T 950 User Manual

Tabletop/desktop installation
continued from page 5
4. Connect the handset to the telephone.
Plug the coiled handset cord into the handset jack on the left
side of the telephone base. Plug the other end of the coiled
cord into the handset, then hang up.
G
Q
pa
3
Ts
oo
4)
£
handset jack
5. Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a
dial tone, press VOLUME ). If you still do not hear a dial tone,
see the In case of difficulty section on pages 34-36 of this manual.
Your phone will work immediately after installation using the default
feature settings (see Default settings on page 31).
Q NoTE: If you subscribe to caller ID services from your local
telephone service provider, you must follow the instructions in
Set home area code (see page 11), for your phone to properly
recognize and dial calls from the call history list. You may also
need to check Set local area code (see page 12) if you want the
phone to recognize multiple area codes.

AT&T 950 Specifications

General

Brand	AT&T
Model	950
Category	Telephone
Language	English