AT&T BL102-2S Quick Start Guide

Telephone settings
16
Telephone settings
Set date/time
The answering system announces the day and time of each
message prior to playing it. Before using the answering system,
set the date and time as follows. If you subscribe to caller ID
service, the day, month and time are set automatically with each
incoming call. The year must be set so that the day of the week
can be calculated from the caller ID information.
Aer handset registration or a power failure, the handset will
prompt you to set the date and time.
1. When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to Set date/time and then press
MENU/SELECT.
3. Press qCID or pDIR to select the month, then press
MENU/SELECT, or enter the number using the dialing keys.
4. Press qCID or pDIR to select the day, then press MENU/SELECT, or
enter the number using the dialing keys.
5. Press qCID or pDIR to select the year, or enter the number using
the dialing keys, then press MENU/SELECT to move on to set the
time.
6. Press qCID or pDIR to select the hour, then press MENU/SELECT,
or enter the number using the dialing keys.
7. Press qCID or pDIR to select the minute, then press MENU/SELECT,
or enter the number using the dialing keys.
8. Press qCID or pDIR to select AM or PM, then press MENU/SELECT
to conrm.
NOTE: If the clock is not set when a message is recorded, the system announces, “Time and day not
set,” before it plays the message.

AT&T BL102-2S Specifications

General

Brand	AT&T
Model	BL102-2S
Category	Cordless Telephone
Language	English