AT&T BL102-2S Quick Start Guide

Join a call in progress
When a handset is already on a call and you would like to join the
call, press PHONE/FLASH or /SPEAKER on your handset.
To end the call using a handset, press OFF/CANCEL or place the
handset in the telephone base or charger. The call does not end
until all handsets hang up.
Intercom
Use the intercom feature for conversations between two handsets, or
a handset and a cordless headset (sold separately). You can purchase
expansion handsets (AT&T model BL102-0) and cordless headsets
for this telephone base to expand your telephone system (up to ve
handsets, or three handsets and two cordless headsets).
Using a handset to initiate intercom calls:
1. Press MENU/SELECT on the handset in idle mode to enter the
main menu. Press qCID or pDIR to scroll to Intercom, then
press MENU/SELECT.
2. If you have two system handsets, the handset shows Calling HS
X (X represents the handset number). The destination device
rings and shows HS X is calling.
-OR-
If you have more than two system handsets, press qCID or
pDIR to select a device, or use the dialing keys to enter a device
number (1-5). The handset shows Calling HS X. The destination
handset rings and shows HS X is calling.
To answer an intercom call:
f Press PHONE/FLASH, /SPEAKER or any dialing key (0-9,
TONE , or
#
) on the called handset. Both handsets now show
Intercom.
To end an intercom call:
f Press OFF/CANCEL or places the handset back in the
telephone base or charger.
Multiple handset use
27

AT&T BL102-2S Specifications

General

Brand	AT&T
Model	BL102-2S
Category	Cordless Telephone
Language	English