Multiple handset use
Call transfer using intercom
Use the intercom feature to transfer an outside call to another
system device. You can also share an outside call with another
system device. This feature is available only if you have two or more
handsets/headsets.
To transfer or share an outside call using intercom:
1. When on an outside call, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Intercom and press
MENU/SELECT. The call is automatically put on hold.
3. If you have two system handsets, the handset shows Calling HS
X (X represents the handset number). The destination device
rings and shows HS X is calling.
-OR-
If you have more than two system handsets, press qCID or
pDIR to select a device, or use the dialing keys to enter a device
number (1-5). The handset shows Calling HS X. The destination
handset rings and shows HS X is calling.
4. To answer the intercom call on the other handset, press
PHONE/FLASH, /SPEAKER
,
or any dialing key (0-9, TONE
or #) on
the destination handset.
T
he outside call is still on hold.
Both devices now show Intercom.
5. To
transfer the call, press OFF/CANCEL or place the handset
back in the telephone base or charger. The other handset
automatically connects to the outside call.
-OR-
You can let the other device join you on the outside call in
a three-way conversation. Press PHONE/FLASH on the
originating or destination handset.
-OR-
The called party can end the intercom call by pressing
OFF/CANCEL or by placing the other handset back in the
telephone base or charger. The outside call continues with the
originating handset.
28
To Next Page
Loading...
Need help?
General
