Answering system
79
Remote access
You can reach your answering system remotely by dialing your
home telephone number from any touch-tone telephone.
To remotely reach your answering system:
1. Dial your telephone number from any touch-tone telephone.
2. When the system answers, enter the two-digit remote access
code (19 is the default code. See page 71 to change it).
f The system automatically announces the number of new or
old messages (if any), and then begins to play them.
3. You can also enter the following remote commands:
Remote
commands
Actions
1
Press to listen to all messages.
2
Press to listen to new messages only.
3
Press to delete the current message (during
playback).
33
Press twice to delete all old messages.
4
Press to repeat the current message (during
playback).
5
Press to stop any operation (including
recording).
*
5
Press to listen to a list of remote commands.
6
Press to skip to the next message (during
playback).
*
7
Press to record a new announcement.
8
Press to end remote access (the call will be
terminated).
0
Press to turn the answering system on or o.
4. Hang up or press 8 to end the calls.
To Next Page
Loading...
Need help?
General
