Telephone operation
25
Telephone operation
Mute
Use the mute function to turn o the microphone. You can hear the
caller, but the caller cannot hear you.
f Press MUTE/DELETE while on a call to enable or disable the mute
feature.
Handset locator
The handset locator feature is useful if you misplace any handsets.
To start the paging tone:
f Press
/HANDSET LOCATOR
on the telephone base to start
the paging tone on all handsets
for 60 seconds.
NOTE: If you press OFF/CANCEL or
MUTE/DELETE on a handset, the ringer
of that handset stops, but the paging to
the rest of the handsets continues.
To stop the paging tone:
f Press PHONE/FLASH,
/SPEAKER, or any dialing
key (0-9, TONE or #) on the
handset(s).
-OR-
f Press
HANDSET LOCATOR
on the telephone base.
** Paging **
ECO
10:30
PM
11/20
ANS ON
To Next Page
Loading...
Need help?
General
