Answering system
74
About the answering system
Call screening
To screen a call at the telephone base:
If the answering system and call screening are on, the
announcement and the incoming message broadcast at the
telephone base when a call is answered by the answering system.
Options while a message is being recorded:
f Press pVOL or qVOL on the telephone base to adjust the call
screening volume.
f Press /PL AY/STO P to temporarily silence the call screening.
f Press /PL AY/STO P to temporarily turn on the call screening
if call screening is set to o.
To screen a call at the handset:
While a message is being recorded, the handset shows, To screen
call, press [SELECT]. Press MENU/SELECT to screen the call.
Options while a message is being recorded:
f Press VOLUME q or VOLUME p on the handset to adjust the
call screening volume.
f Press OFF/CANCEL to temporarily silence the call screening.
f Press MENU/SELECT to temporarily turn on the call screening if
call screening is set to o.
f Press /SPEAKER to broadcast the announcement and the
incoming message through the speakerphone. Press again to turn
o the speakerphone.
Call intercept
While screening a call, you can stop recording and speak to the caller by
pressing PHONE/FLASH on the handset.
To Next Page
Loading...
Need help?
General
