Telephone settings
20
Telephone settings
Key tone
The handset is set to beep with each key press. You can adjust the
key tone volume or turn it o.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Use qCID or pDIR to scroll to Key tone, then press MENU/SELECT.
4. Use qCID or pDIR to select On or O.
5. Press MENU/SELECT to save your preference.
Home area code
If you dial seven digits to make a local call (no area code required),
enter your area code into the telephone as the home area code.
When you receive a call from within your home area code, the caller
ID log only displays the seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID
log. If you dial ten digits to make a local phone call, do not use this
home area code feature. If you do, you cannot place local calls from
your caller ID log, as they will have only seven digits.
To set the home area code:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press MENU/SELECT.
3. Use qCID or pDIR to scroll to Home area code, then press
MENU/SELECT.
4. Use the dialing keys to enter a three-digit home area code.
f Press MUTE/DELETE to delete a digit.
f Press and hold MUTE/DELETE to delete all digits.
5. Press MENU/SELECT to save.
To Next Page
Loading...
Need help?
General
