5
Getting started
NOTES:
Use only the power adapter provided with this product. To obtain a
replacement, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it
is plugged into a ceiling, under-the-table or cabinet outlet.
You can use this telephone without the power adapter installed. See Line
power mode on page 13.
After you first install your telephone, the system will prompt you to set the
date and time, and outgoing announcement.
•
•
•
•
Adjust the angle of the screen to reach maximum visibility.4.
Telephone installation
To Next Page
Loading...
