30
Caller ID
View dialing options
Although the incoming caller ID log entries have
10 digits (the area code plus the seven-digit
number), in some areas, you may need to dial
only the seven digits, 1 plus the seven digits, or 1
plus the area code plus the seven digits. You can
change and store the number of digits that you
dial in the caller ID log.
While reviewing the caller ID log, press # (pound
key) repeatedly to show different dialing options
for local and long distance numbers before dialing
or saving the telephone number in the directory or
speed dial location.
When the number is in the correct format for dialing, lift the handset or press
SPEAKER to call the number.
To save the number to the directory or speed dial location, see Save a caller
ID log entry to the directory on the next page or see Assign a speed dial
number from the directory or caller ID log on page 24.
Dial a caller ID log entry
When in the caller ID log, press CALL LOGq or DIRECTORYp to browse.
Lift the handset or press SPEAKER to dial the displayed entry.
Delete caller ID log entries
To delete an entry:
Press DELETE X to delete the shown entry. There is a
confirmation tone and the screen shows Deleted.
To delete all entries:
Press MENU/SELECT when in idle mode.
Press CALL LOGq or DIRECTORYp to scroll to
Caller ID log, then press MENU/SELECT.
Press CALL LOGq or DIRECTORYp to scroll to
Del all calls, then press MENU/SELECT.
When the screen shows Delete all calls?, press
MENU/SELECT to confirm. There is a confirmation
tone and the screen shows All calls deleted.
1.
2.
1.
2.
3.
4.
Caller ID operation
All calls
deleted
Delete
all calls?
Deleted
Press #
360-4121
1-360-4121
800-360-4121
1800-360-4121
p
q
ROBERT BROWN
800-360-4121
9/16
10:34
AM
1
NEW
No:
To Next Page
Loading...
Need help?
General
