20
Directory
Press MENU/SELECT. The screen shows Enter name.
Use the dialing keys to enter a name (up to 15 characters) when prompted.
Each time you press a key, the character on that
key appears. Additional key presses produce
other characters on that key. See the chart on the
previous page.
Press CALL LOGq or DIRECTORYp to move the
cursor to the left or right.
Press DELETE X to erase a character..
Press MENU/SELECT to store your new directory
entry. There is a confirmation tone and the screen
shows Saved. To change the entry later, see
page 22.
NOTE: Numbers can be up to 24 digits and names can be up to 15 characters. If you enter
more than 24 digits and 15 characters, you will hear an error tone.
Review directory entries
Press DIRECTORYp when in idle mode. The first entry in the
directory shows.
-OR-
Press MENU/SELECT when in idle mode, then press CALL LOGq or
DIRECTORYp to scroll to Directory. Press MENU/SELECT, then press
CALL LOGq or DIRECTORYp to scroll to Review, press MENU/SELECT.
Press CALL LOGq or DIRECTORYp to browse through the directory. Entries
appear alphabetically by the first letter in the name.
NOTES:
If the telephone number in the directory exceeds 15 digits, < appears in front of the
telephone number. Press TONE to move towards the end of the telephone number or press
# (pound key) to move towards the beginning of the telephone number.
Directory empty Add contact? appears if there are no directory entries.
6.
7.
•
•
8.
1.
2.
•
•
Directory
Saved
Enter name
LINDA_
To Next Page
Loading...
Need help?
General
