7
Getting started
Installation options
Plug one end of the telephone line cord into the telephone line jack on
the bottom of the telephone base. Plug the other end into a telephone
wall jack or a DSL filter. Bundle the telephone line cord and secure it with
a twist tie.
Plug the power adapter into an electrical outlet not controlled by a
wall switch.
3.
4.
Place the telephone just above the studs on the wall-mounting plate. Slide
the telephone down until it is held securely on the wall-mounting plate.
Place the handset on the telephone base.
5.
Adjust the screen angle for maximum visibility. 6.
DSL filter (not included)
is required if you
have DSL high-speed
Internet service.
Telephone wall jack
Electrical outlet
not controlled by
a wall switch
Route the power adapter cord
through the slot.
To Next Page
Loading...
