AT&T CL82219 User Manual

Install the battery, as shown below.
1.
2.
Charge your handset(s) before initial use. The battery is fully charged after 10 hours of
continuous charging. The CHARGE light on the top of the handset is on during charging.
3.
Caution: Use only the supplied rechargeable battery or replacement battery (model
BT183342/BT283342).
Handset overview

AT&T CL82219 Specifications

Technical Specifications

RF frequency band	1921.536MHz – 1928.448MHz
Channels	5

Power

Telephone base voltage (AC voltage, 60Hz)	96Vrms – 130Vrms
Telephone base voltage (AC adapter output)	6VDC @ 400mA
Charger voltage (AC adapter output)	6VDC @ 400mA

Battery

Handset battery	2.4V 400mAh, 2xAAA Ni-MH
Talk time (cordless handset)	up to 7 hours
Standby time	up to 5 days