AT&T CL82219 User Manual

Handset
1. REDIAL/
PAUSE
* Press repeatedly to view the last ten numbers dialed.
* While entering numbers, press and hold to insert a dialing pause.
MENU/ SELECT
* When the handset is not in use, press to show the menu.
* While in the menu, press to select an item or save an entry or setting.
2. VOL DIR
* Press to show directory entries when the handset is not in use.
* Press to scroll up while in menus.
* Press to increase the listening volume when on a call.
CALL BLOCK
* Press to block the incoming call when the telephone is
ringing.
* When on a call, press to block the call.
* When the handset is not in use, press to show the call
block menu.
VOL CID
* Press to show caller ID log when the handset is not in use.
* Press to scroll down while in menus.
* Press to decrease the listening volume when on a call.
3. PHONE/ FLASH
* Press to make or answer a call.
* During a call, press to answer an incoming call when you receive a call waiting alert.
OFF/ CANCEL
* During a call, press to hang up.
* While in a menu, press to cancel an operation, back up to the previous menu, or exit the menu
display; or press and hold this button to exit to idle mode.

AT&T CL82219 Specifications

Technical Specifications

RF frequency band	1921.536MHz – 1928.448MHz
Channels	5

Power

Telephone base voltage (AC voltage, 60Hz)	96Vrms – 130Vrms
Telephone base voltage (AC adapter output)	6VDC @ 400mA
Charger voltage (AC adapter output)	6VDC @ 400mA

Battery

Handset battery	2.4V 400mAh, 2xAAA Ni-MH
Talk time (cordless handset)	up to 7 hours
Standby time	up to 5 days