Answering system
About answering system and voicemail
Your telephone has separate indicators for two different types of voice messages: those left on the
built-in answering system and those left at your telephone service provider’s voicemail. To listen to
messages recorded on the built-in answering system, refer to the Message playback section; to
listen to voicemail, contact your telephone service provider for more information.
Built-in answering : system Voicemail service
Supported by Telephone system: Telephone service provider
Subscription No: Yes
Fees No: May apply
Answer incoming calls
After 3 rings by default.
It can be changed in the handset or the telephone base menu.:
Usually after 2 rings.
It can be changed by contacting your telephone service provider.
Storage Telephone base: Server or System
Display new messages
Handset and telephone base – XX New messages:
Handset and telephone base – and New voicemail
Retrieve messages
Press on the telephone base; OR
Press MENU, and then select Play messages on the handset; OR
Access remotely with an access code.:
Press on the dialpad, and enter an access number from your telephone service provider.
Turn answering system on or off
The answering system must be turned on to answer and record messages.
1. MENU -> or -> Answering sys -> SELECT.
2. or -> Answer ON/OFF -> SELECT.
3. or to choose On or Off-> SELECT.
When the answering system is on, the handset shows ANS ON.
Message alert tone
When this feature is on, and there is at least one new message, the telephone base beeps every 10
seconds.
1. MENU -> or -> Answering sys -> SELECT.
To Next Page
Loading...
