2. or -> Ans sys setup -> SELECT.
3. or -> Msg alert tone -> SELECT.
4. or to choose On or Off -> SELECT.
Call screening
Use this feature to choose whether incoming messages can be heard over at telephone base when
they are being recorded. If you turn call screening on, you hear the incoming message at the
telephone base. While monitoring an incoming message, you can answer the call by pressing
PHONE on the handset.
1. MENU -> or -> Answering sys -> SELECT.
2. or -> Ans sys setup -> SELECT.
3. SELECT to select Call screening.
4. or to choose On or Off -> SELECT.
Message playback
Using the telephone base
Press /PLAY when the telephone base is in idle mode.
Using a handset
Press MENU twice when the handset is in idle mode.
Options during playback
Feature:
On the telephone base:
On a handset
Adjust playback to volume:
Press / VOLUME / :
Press / VOLUME /
Stop playback:
Press /STOP:
Press 5/ CANCEL
Skip to the next message:
Press /SKIP:
Press 6
Repeat the message:
Press /REPEAT:
Press 4
Play the previous message:
Press /REPEAT twice:
Press 4 twice
Delete the message:
Press X/DELETE:
Press DELETE
To Next Page
Loading...
Need help?
Technical Specifications
Power
Battery
