1. CALL BLOCK -> or -> Set proile -> SELECT.
2. or -> Block unknown -> SELECT.
Add a screened number to the block list or allow list
If you select Screen unknown or Screen robot in Set profile, the telephone plays a screening
announcement to the caller, and asks the caller to respond before the call rings through to you. After
the caller responds, the telephone rings and you can then pick up the call. The telephone then asks
whether you want to answer or reject the call, or to forward the call to the answering system. The
telephone announces
“To answer the call, press 1. To answer and always allow this number, press 2. To block this number,
press 3. To send this call to the answering system, press 4. To repeat these options, press *”.
You can add a screened number to the block list or to the allow list.
Add current number to the allow list
* Press 2 to answer the call, and add the current number to the allow list.
Add current number to the block list
* Press 3 to block the call, and add the current number to the block list.
Notes
Unknown calls without caller ID information will not have the option 2, “answer and always allow
this number”, and option 3, “to block this number”. No number will be added to the allow list or
block list for these calls.
If you do not want to take the call, press OFF to end the call.
Block the caller while on a call
When you are on a call and speaking to the caller, and you do not want to continue the call, you can
end the call with block announcement and add the number to the block list.
1. During a call, press CALL BLOCK.
2. Press SELECT to end the call.
Notes
The allow list stores up to 200 entries, the block list stores up to 1,000 entries, and the star name
list stores up to 10 names.
There are many organizations like schools, medical offices, and pharmacies that use robocalls to
communicate important information to you. Robocall uses an autodialer to deliver pre-recorded
messages. By entering the name of the organizations into the star name list, it ensures these calls will
ring through when you only know the caller names but not their numbers.
Unblock a telephone number
If you have added a telephone number to the block list, you can unblock it.
1. Press CALL BLOCK.
2. or -> Block list -> SELECT.
3. Press SELECT to select Review.
4. or to browse through the block entries.
5. When the desired entry displays, press DELETE, then press SELECT to confirm.
To Next Page
Loading...
Need help?
Technical Specifications
Power
Battery
