Screen unknown
The telephone plays the screening announcement, and then ask the caller to say his/her name before
the call rings on your telephone. You can then answer the call, and hear the caller’s name announced.
You can decide whether to accept or reject the call, or to forward the call to the answering system.
Screen robot
The telephone plays the screening announcement, and then ask the caller to press the pound key (#)
before the call rings on your telephone. You can then answer the call.
Allow unknown (default setting)
The telephone allows the calls to get through and ring.
Unknown to answering system
The telephone forwards the calls to the answering system without ringing.
Block unknown
The telephone rejects the calls with block announcement.
Notes:
Smart call blocker is on, once you install your telephone. It allows all incoming calls to get through
and ring by default. You can change the Smart call blocker settings to screen incoming calls from
numbers or names that are not yet saved in your directory, allow list, block list, or star name list.
You can easily add incoming phone numbers to your allow list and block list. This allows you to
build up your lists of allowed and blocked numbers, and Smart call blocker will know how to deal
with these calls when they come in again.
If you turn off Smart call blocker, all incoming calls will ring, including numbers saved in your
block list.
When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls
will be sent to the answering system after screening.
Set up allow list, block list and star name list
Add numbers from caller ID log
Adding CID log entry to block list
1. Press CID on the handset or on telephone base -> or .
2. Press SELECT when the desired entry appears.
3. or -> Block list -> SELECT twice.
4. Press SELECT again to save.
Adding CID log entry to allow list
1. Press CID on the handset or on telephone base -> or .
2. Press SELECT when the desired entry appears.
3. or -> Allow list -> SELECT.
4. Press SELECT twice to save.
Adding CID log entry to star name list
1. Press CID on the handset or on telephone base -> or .
2. Press SELECT when the desired entry appears.
3. or -> Star name list -> SELECT twice.
Add numbers manually
Adding a new number to the block list
To Next Page
Loading...
Need help?
Technical Specifications
Power
Battery
