Message counter
* Shows the number of messages.
3. VOLUME
* While in idle mode, press to adjust the base ringer volume.
* During message playback, press to adjust the listening volume.
4. FIND HS
* While the phone is idle, press to page all handsets.
5. /ANS ON/OFF
* Press to turn the built-in answering system on or off.
Initial basic settings
After you install your telephone or power returns following a power outage, the handset and telephone
base will prompt you to set the date and time. To skip setting the date and time, press
OFF/CANCEL on the handset.
Voice guide to set Smart call blocker and answering system
After the date and time setting is done or skipped, the telephone base will prompt if you want to set
Smart call blocker. Press MENU/SELECT to start the Smart call blocker setup via voice guide. To skip
the setup, press OFF/CANCEL.
After the Smart call blocker setting is done or skipped, the telephone base will then prompt if you
want to set up the answering system. Press MENU/SELECT to start the answering system setup via
voice guide. To skip the setup, press OFF/CANCEL.
We recommend you program your telephone system before use. The following are a few
examples of common features to set before using the telephone. Refer to the Handset and
telephone base settings and Answering system settings in the Complete user’s manual for
detailed instructions on setting all telephone features.
Note: You can restart the voice guide to set Smart call blocker by resetting your handset
power.
Date and time
Note: Set the date/time before using the answering system.
1. MENU -> or -> Set date/time -> SELECT.
2. Enter the month, day and year using the dialing keys -> SELECT.
3. Enter the hour and minute using the dialing keys.
4. or to choose AM or PM -> SELECT.
Basic answering system setup via voice guide
To Next Page
Loading...
Need help?
Technical Specifications
Power
Battery
