AT&T E6012B - Answering system mode

41
Answering system operation
ANSWER ON
Press until the system
announces “Calls will
not be answered.”
"Beep" the system
has been turned off.
1.
2.
Answering system mode
The answering system is factory programmed
to answer and record callers’ messages. If you
choose to turn the answering system off, it will
not answer calls and record incoming messages.
To turn the answering system off
Press ANSWER ON until “Calls will not be
answered” is announced. You'll hear a confirma-
tion beep. The ANSWER ON light is off.
NOTE: If the answering system is off, after 10 rings, it
will announce “Please enter your remote access code.” Enter
your remote access code to enter the remote access mode (
page 42). If the correct remote access code is not entered,
the call will be disconnected automatically.
To turn the answering system on
Press ANSWER ON until “Calls will be
answered” is announced. You'll hear a confirma-
tion beep. The ANSWER ON light is lit.
-OR-
ANSWER ON
Press until the system
announces “Calls will be
answered.”
"Beep" the system
has been turned on.
2.
1.