3
Getting started
Quick reference guide
Telephone base
CHARGE/IN USE
• Flashes when another telephone
on the same line and on steady
when one of the handsets is in use.
• On steady when the answering
system is answering an incoming
call.
• Flashes while an incoming call is
ringing.
• On steady when the handset is
properly positioned to charge in the
telephone base.
HANDSET LOCATOR
Press to make handsets
beep (page 12).
Press to repeat mes-
sage. Press twice to
hear previous mes-
sage.
Press to hear setup
options (page 37).
Press to delete message
currently playing; press
and hold to delete all
old messages (page 38).
Press to review or record
announcement; press
again to quit (page 36).
Press to record a memo
(page 39) or after press-
ing ANNC to record an
outgoing announcement
(page 36).
Press to turn answering
system on or off (page
41).
Press to repeat mes-
sage; press twice to
play previous message
(page 38).
Press to start or stop
message playback (page
38).
Press to adjust playback
volume (page 38).
Press to skip message
(page 38).
/SKIP
VOLUME
ANSWER ON
RECORD
X/DELETE
PLAY/STOP
ANNC
CLOCK
/REPEAT
Press to review or set
clock (page 35).
SETUP
Number of messages (or
during playback, message
number currently playing).
MESSAGE COUNTER
VOICEMAIL
Flashes when you have
new voice mail (requires
voice mail service from
your local telephone com-
pany.
To Next Page
Loading...
