19
Call block
If you have subscribed to caller ID service, you can use the call block feature to reject
certain calls automatically. The call block list can store up to 20 entries. Automatic call
rejection can be applied to:
• Numbers saved into the call block list
• Incoming calls without numbers
This feature is only available on the cordless handset.
Add a call block entry
1. On a handset, press in idle mode.
2. Press or to scroll to Call block, then press .
3. Press to choose Block list.
4. Press or to scroll to Add new entry, then press .
5. When the screen displays Enter number, use the dialing keys to enter a telephone
number (up to 30 digits).
• Press or to move the cursor to the le or right.
• Press to erase a digit.
• Press and hold to erase all digits.
• Press and hold to enter a three-second dialing pause (a P appears).
-OR-
• Copy a number from the redial list by pressing . Then, press
or or repeatedly to nd the desired number. Press
to copy the number.
6. Press to move on to the name.
7. When the screen displays Enter name, use the dialing keys to enter a name (up to 15
characters). Press a key repeatedly until the desired character appears.
• Press or to move the cursor to the le or right.
• Press 0 to add a space.
• Press to erase a character.
• Press and hold to erase all characters.
8. Press to store your call block entry.
To Next Page
Loading...
Need help?
General
