24
Call screening
If Call screening is on, the incoming messages can be played through the speaker on
the telephone base or the handsets. You can press on the handset to
stop recording and speak to the caller.
Call screening at the handset:
If the answering system is turned on and there is an incoming call answered by the
answering system, the handset screen shows To screen call and press [SELECT],
alternately. Press on the handset to screen the call.
Call screening at the base:
You can turn call screening on or o using the handset. When call screening is o,
you can temporarily turn on the call screening by pressing or
on the telephone base. The call screening will return to o for the next incoming call.
Message playback
If there are only new messages or there are both new and old messages, the system
plays only the new messages (in chronological order). If there are no new messages, the
system plays all old messages (in chronological order). When playback begins, the total
number of messages is announced.
You can play messages from either the telephone base or a handset.
On the telephone base, press to listen to messages. Use the the
corresponding key on the telephone base to repeat, skip, delete, or adjust the volume
of messages.
On a handset, press twice to select Play messages. Use the
corresponding key, as indicated on the screen, to repeat, skip or delete a message.
Delete all old messages
You can delete all old messages in idle mode. Once deleted, you cannot retrieve them.
You cannot delete messages until you have listened to them.
• On the telephone base: Press twice.
• On a handset:
1. Press in idle mode.
2. Press or to scroll to Answering sys, then press .
3. Press or to scroll to Delete all old, then press .
To Next Page
Loading...
Need help?
General
