AT&T EL52115 Quick Start Guide

23
Voice guide
This feature is an alternative way for you to do the basic setup of the answering system.
You can follow the voice guide to record your own announcement, set the number of
rings, and set the message alert tone.
This feature is only available on the cordless handset.
1. On a handset, press in idle mode.
2. Press or to scroll to Answering sys, then press .
3. Press or to scroll to Voice guide, then press . You hear
a voice prompt, “Hello! This voice guide will assist you with the basic setup of your
answering system.“
4. Setup your answering system by inputting designated numbers, as instructed in the
voice guide.
NOTE: You can press to quite the voice guide at any time.
Number of rings
You can set the answering system to answer an incoming call aer 6, 5, 4, 3, or 2 rings.
You can also select Toll saver. If toll saver is selected, the answering system answers a
call aer two rings when you have new messages, and aer four rings when there are
no new messages. This feature allows you to check for new messages and avoid paying
long distance charges if you are calling from out of your local area. Unless you change it,
the answering system answers an incoming call aer 3 rings.
To set the number of rings:
1. On a handset, press in idle mode.
2. Press or to scroll to Answering sys, then press
.
3. Press or to scroll to Ans sys setup, then press
.
4. Press or to scroll to # of rings, then press
.
5. Press or to scroll and choose among 6, 5, 4, 3, 2 or
Toll saver.
6. Press to save.
NOTE: If you have muted the first ring, you will hear one ring less before the answering system
answers the incoming calls.
# of rings
ECO
3
ECO

AT&T EL52115 Specifications

General

Brand	AT&T
Model	EL52115
Category	Cordless Telephone
Language	English