25
Remote access
You can access the answering system remotely by dialing your home telephone number
from any touch-tone telephone. When the answering system answers, enter the 2-digit
remote access code (19, unless you have changed it; refer to Feature summary on page 9).
New messages are played automatically. Use the remote commands to control playback.
There is also a wallet card listing the remote commands at the back of the online user’s
manual.
Remote access commands
Actions Remote command
Play all messages.........................................................1
Play new messages ...................................................2
Delete the message (during playback) .......3
Delete all old messages ...................................... 33
Repeat or go back......................................................4
Stop .....................................................................................5
Actions Remote command
Help menu .................................................................. 5
Skip the message ..................................................... 6
Record announcement...................................... 7
Turn system on or o ............................................ 0
End remote access call (or hang up) ...........8
To Next Page
Loading...
