4
Battery installation
Install the battery, as shown below.
1. Plug the battery connector securely into the socket inside the handset battery
compartment.
2. Insert the supplied battery with the label THIS SIDE UP facing up, as indicated.
3. Align the cover at against the battery compartment, then slide it upwards until it clicks
into place.
4. Charge the handset by placing it
face forward in the telephone base
or charger. The light is on
when charging.
CHARGE light
CR1423
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT162342/BT262342 (2.4V 300mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1423
THIS SIDE UP
Battery Pack / Bloc-piles
BT162342/BT262342 (2.4V 4
WARNING / AVERTISSEMENT
DO NOT BURN OR PUNCTURE B
NE PAS INCINÉRER OU PERCER L
Made in China / Fabriqué en chine
To Next Page
Loading...
