AT&T EL52119 User Manual

15
Telephone settings
Handset settings
Ringer volume
You can set the handset ringer volume level (1-6), or turn
the ringer o. When the ringer is o, appears on the
handset screen.
1. Press MENU/SELECT when the handset is idle.
2. Press CID or DIR to scroll to Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume.
4. Press CID or DIR to sample each volume level.
5. Press MENU/SELECT to save your preference.
NOTES:
X Changing the handset ringer volume does not aect the base ringer volume. For more
information on the base ringer volume, see Telephone base ringer volume on page 21.
X The handset ringer volume also determines the ringer volume of intercom calls.
X If the handset ringer volume is o, that handset ringer is silenced for all incoming calls.
However, that handset still plays the paging tone when responding to the nd handset
feature (see Find handset on page 29).
X While the telephone is ringing, press OFF/CANCEL or MUTE to silence the ringer temporarily
on that handset only (see Temporary ringer silencing on page 22).
Ringer tone
You can choose one of 10 ringer tones for the handset.
1. Press MENU/SELECT when the handset is idle.
2. Press CID or DIR to scroll to Ringers, then press
MENU/SELECT.
3. Press CID or DIR to scroll to Ringer tone, then press
MENU/SELECT.
4. Press CID or DIR to sample each tone.
5. Press MENU/SELECT to save your preference.
NOTE: if you turn o the handset ringer volume, you will not hear ringer tone samples.
Ringer volume
ECO
Volume:
ECO
Ringer tone
ECO
Tone: 1
ECO

AT&T EL52119 Specifications

General

Brand	AT&T
Model	EL52119
Category	Cordless Telephone
Language	English