27
Telephone operation
Temporary tone dialing
If you have dial-pulse (rotary) dialing service only, you can temporarily switch
from pulse-tone dialing to touch-tone dialing during a call.
1. During a call, press TONE
.
2. Use the dialing keys to enter the desired number. The
telephone sends touch-tone signals.
3. The telephone automatically returns to pulse dial
mode aer you end the call.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in
the directory, caller ID log or redial list. Doing this can be useful if you need to
access numbers other than telephone numbers (such as account numbers or
access codes).
To access the directory while on a call:
1. Press MENU/SELECT.
2. Press MENU/SELECT again to choose Directory.
3. Press
CID or
DIR to scroll or use the dialing keys (0-9)
to nd the desired entry (see Search by name on page
38).
4. Press MENU/SELECT. The telephone automatically dials
the displayed number.
To access the caller ID log while on a call:
1. Press MENU/SELECT.
2. Press
CID or
DIR to scroll to Caller ID log, then press
MENU/SELECT.
3. Press
CID or
DIR to scroll to the desired entry. Press
(pound key) to view other dialing options, if necessary.
See View dialing options on page 43 for more details.
4. Press MENU/SELECT. The telephone automatically dials
the displayed number.
Options while on calls
ECO
Phone 0:01:30
888-722-7702
ECO
10:30
PM
11/20
Directory
ECO
Charlie Johnson
888-883-2445
ROBERT BROWN
800-360-4121
ECO
10:30
PM
11/20
To Next Page
Loading...
