AT&T EL52119 - Managing the Call Block List

49
Call block
Call block
Add a call block entry
1. Press MENU/SELECT when the handset is idle.
2. Press CID or DIR to scroll to Call block, then press
MENU/SELECT.
3. Press MENU/SELECT again to choose Block list.
4. Press CID or DIR to scroll to Add new entry, then
press MENU/SELECT.
5. When the screen displays Enter number, use the
dialing keys to enter a number (up to 30 digits).
X Press CID or DIR to move the cursor to the le
or right.
X Press and hold REDIAL/PAUSE to enter a 3-second
dialing pause (a P appears).
X Press DELETE to erase a digit.
X Press and hold DELETE to erase all digits.
-OR-
Copy a number from the redial list by pressing
REDIAL/PAUSE. Then, press CID or DIR or
REDIAL/PAUSE repeatedly to nd the desired number.
Press MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
7. When the screen displays Enter name, use the dialing keys to enter a
name (up to 15 characters). Each time you press a key, the character on
that key appears. Additional key presses produce other
characters on that key. Press a key repeatedly until the
desired character appears. The rst character of every
word is capitalized.
X Press CID or DIR to move the cursor to the le
or right.
X Press 0 to add a space.
X Press DELETE to erase a character.
X Press and hold DELETE to erase all characters.
8. Press MENU/SELECT to store your call block entry.
NOTE: The handset shows Number repeated if the number is already in the call block list.
You cannot save the same number twice.
Call block
ECO
Block list
ECO
Add new entry
ECO
Enter number
888-883-2445_
ECO
Enter name
ECO
TV Salesman_
ECO