AT&T EL52119 User Manual

58
Answering system
Answering system settings
Number of rings
You can set the answering system to answer an incoming call aer 2, 3, 4, 5,
or 6 rings. You can also select Toll saver, which is explained below. Unless you
change it, the answering system answers an incoming call aer
three rings.
To set the number of rings:
1. Press MENU/SELECT when the handset is idle.
2. Press CID or DIR to scroll to Answering sys,
then press MENU/SELECT.
3. Press CID or DIR to scroll to Ans sys setup,
then press MENU/SELECT.
4. Press CID or DIR to scroll to
#
of rings, then
press MENU/SELECT.
5. Press CID or DIR to scroll and choose among
2, 3, 4, 5, 6 or Toll saver.
X Toll saver - The answering system answers a call aer two rings when
you have new messages, and aer four rings when there are no new
messages. This feature allows you to check for new messages and avoid
paying long distance charges if you are calling from out of your local area.
6. Press MENU/SELECT to save your setting.
NOTES:
X If you subscribe to a voicemail service oered through your telephone service provider, see
Answering system and voicemail indicators on page 61.
X If you have muted the rst ring, you will hear one ring less before the answering system
answers the incoming calls.
# of rings
ECO
3
ECO

AT&T EL52119 Specifications

General

Brand	AT&T
Model	EL52119
Category	Cordless Telephone
Language	English