63
Answering system
Answering system overview
Call screening
Call screening at the base:
If the answering system and call screening
are on, the announcement and the
incoming message can be broadcast at the
telephone base when a call arrives.
You can turn call screening on or o using
the handset (see Call screening on page
57). When call screening is o, you can
temporarily turn on the call screening by
pressing PLAY/STOP
or VOL on the telephone base. The call screening
will automatically be o for the next incoming call.
If call screening is on and you want to silence the telephone base while it is
recording messages, press PLAY/STOP
on the telephone base. The call
screening will be on for the next incoming call.
Call screening at the handset:
If the answering system is turned on, when there is an incoming call and it is
answered by the answering system, the handset screen shows To screen call
and press [SELECT], alternately. By pressing MENU/SELECT, you can screen
the call at the handset.
To Next Page
Loading...
Need help?
General
