53
Answering system
Answering system settings
Use the answering system menu in the handset to turn the answering
system on or o or change the settings for the outgoing announcement, call
screening, number of rings, remote access code and the message alert tone.
Announcement
The announcement is the greeting callers hear when calls are answered by
the answering system.
The telephone has a default announcement, “Hello. Please leave a message
aer the tone.” You can use this announcement, or record your own
announcement.
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than 2 seconds.
To play the current announcement:
1. Press MENU/SELECT when the handset is idle.
2. Press
CID or
DIR to scroll to Answering sys,
then press MENU/SELECT.
3. Press MENU/SELECT again to select Announcement.
The system announces, “To play, press 2. To record,
press 7.”
4. Press 2 to play the current announcement from
the speakerphone.
X Press
DIR/VOLUME to increase or press
CID/VOLUME to decrease the message
playback volume.
X Press /SPEAKER to switch between
speakerphone and handset.
Answering sys
ECO
Announcement
ECO
Play Del Rec
[2] [3] [7]
ECO
53
To Next Page
Loading...
Need help?
General
