AT&T EL52119 - Remote Access Code

59
Answering system
Remote access code
To access your answering system remotely from any touch-tone telephone,
you need to enter a 2-digit number (00-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
1. Press MENU/SELECT when the handset is idle.
2. Press CID or DIR to scroll to Answering sys,
then press MENU/SELECT.
3. Press CID or DIR to scroll to Ans sys setup,
then press MENU/SELECT.
4. Press CID or DIR to scroll to Remote code, then press
MENU/SELECT.
5. Press CID or DIR to select the remote access code, or
use the dialing keys to enter the desired number (00-99).
6. Press MENU/SELECT to save your setting.
NOTE: For more details about the remote access feature, refer to Remote access on
pages 70-71.
Answering system settings
Remote code
ECO
Remote code
19
ECO