AT&T EL52210 User Manual

16
Making, answering and ending calls
Making a call
To make a call:
Press PHONE/FLASH, then wait for the dial tone.
-OR-
Press SPEAKER, to use the speakerphone, then wait
for the dial tone.
Use the dial pad keys to enter the telephone number.
On-hook dialing (predialing):
Use the dial pad keys to enter the telephone number
(up to 30 digits).
Press and hold REDIAL/PAUSE to insert a three-second
dialing pause (a P appears).
Press MUTE/DELETE or OFF/CLEAR to make
corrections.
Press PHONE/FLASH to call.
-OR-
Press SPEAKER to call using the speakerphone.
-OR-
Press and hold OFF/CLEAR to return to the idle mode.
NOTES:
Pressing PHONE/FLASH to access services from your telephone service provider does not
aect the elapsed time.
When a handset is on a call, if another handset attempts to access the directory, speed dial
list or caller ID history, the screen shows NOT AVAILABLE AT THIS TIME.
Temporary ringer silencing
To silence the ringer temporarily on that handset only:
While the telephone is ringing, press OFF/CLEAR or
MUTE/DELETE.
To silence the ringer temporarily on the telephone base:
While the telephone is ringing, press VOLUME on the
telephone base.
This turns o the ringer without disconnecting the call. The next incoming
call rings normally at the preset volume.
NOTE: Unless the ringer volume is turned o on that handset, each handset rings when
there is an incoming call.
1.
2.
1.
•
•
2.
•
•
•
•
Telephone operation
888-722-7702
The screen displays the
elapsed time as you
talk (in hours, minutes
and seconds).
10:30
PM
11/20
PHONE 0:01:30
888-722-7702
RINGER MUTED

AT&T EL52210 Specifications

General

Brand	AT&T
Model	EL52210
Category	Cordless Telephone
Language	English