45
Answering system operation
Answering system overview
Call intercept
While call screening, you can press PHONE/FLASH or
SPEAKER on the handset to stop recording and speak
to the caller.
Temporarily turn o the message alert tone
Follow the step to temporarily silence the message alert tone:
When the telephone base is in idle mode, press any
telephone base key (except
HANDSET LOCATOR).
The message alert tone is activated again with the next
incoming message.
NOTES:
When the telephone base is in idle mode, if you press DELETE to
temporarily silence the message alert tone, there is a voice prompt to direct you to press
DELETE again to delete all old messages (see To delete all old messages at the telephone
base on page 48). If you are not going to delete all old messages, wait at least
5 seconds to allow the telephone base to return to idle mode.
To turn o the message alert tone, see Message alert tone on page 42.
•
•
•
To Next Page
Loading...
Need help?
General
