22
Telephone operation
Options while on calls
To access the redial list while on a call:
Press REDIAL/PAUSE. The screen shows the number
most recently called. If it is not the desired number,
press DIR or CID to scroll to the desired number.
Press MENU/SELECT. The handset dials the displayed
number.
NOTES:
While on a call, you cannot edit a directory entry or copy a caller ID entry into the directory.
If someone else is already using the directory, speed dial list, caller ID history or answering
system, when you attempt to access one of them, the screen shows NOT AVAILABLE AT
THIS TIME.
Press OFF/CLEAR to exit directory, caller ID history or redial list and return to the call
without dialing the displayed number.
Join a call in progress
If a handset is already on a call and you would like to join the call:
Press PHONE/FLASH or
SPEAKER on another
system handset.
To end the call:
Press OFF/CLEAR or place the handset in the
telephone base or charger.
The call does not end until all handsets hang up.
NOTE: You can only use two system handsets at the same time on an outside call. If another
handset attempts to join the call, the handset screen shows UNABLE TO CALL TRY AGAIN.
1.
2.
•
•
•
•
•
REDIAL
888-722-7702
To Next Page
Loading...
Need help?
General
