AT&T EL52210 User Manual

23
Telephone operation
Handset locator
You can use the handset locator feature to nd misplaced handsets.
To start the paging tone:
Press HANDSET LOCATOR on the telephone base
to start the paging tone on all handsets for
60 seconds.
To stop the paging tone:
Press PHONE/FLASH, SPEAKER, or any dial pad
key (0-9, or #) on the handset(s).
-OR-
Press HANDSET LOCATOR on the telephone base.
-OR-
Place the handset in the telephone base or charger.
NOTES:
If you press OFF/CLEAR or MUTE/DELETE on a handset, the ringer
of that handset is silenced but the paging tone continues on the
other handsets.
If the handset is accessing the answering system, on a call (intercom call or outside call), or
out of range, that handset does not beep when paged.
You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.
•
•
•
•
•
•
•

AT&T EL52210 Specifications

General

Brand	AT&T
Model	EL52210
Category	Cordless Telephone
Language	English