52
Answering system operation
Remote access
Hang up to end the call and save all messages.
There is a wallet card listing the remote commands at the back of this user’s
manual. Cut it out and keep it in your wallet for quick reference.
NOTES:
If you do not enter a valid remote access code, the system answers the call automatically.
If the date and time is not set when a message is recorded, the system announces, “Time and
date not set” before the answering system announces the number of messages.
If there are no messages in the answering system, the system announces, “You have no
message.”
If there are no new messages in the answering system, when you press 2 to play back new
messages, the system announces, “You have no new message.”
If you pause for more than four seconds during remote access, you hear a help menu listing
all features and commands. If there is no command for another 20 seconds, the call
ends automatically.
If the memory is full, the answering system answers aer 10 rings and announces, “Memory
is full. Enter the remote access code.” Enter your remote access code to access the messages
and announcements.
When the answering system is turned o, the telephone answers aer 10 rings, and
announces, “Please enter your remote access code.”
5.
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
