12
Telephone Operation
Basic base operation
Making and answering calls
To answer a call, lift the corded handset, press SPEAK-
ERPHONE
, or press HEADSET (if a headset is connected).
To make a call, lift the corded handset, press
SPEAKER-
PHONE or press HEADSET, then dial a number. You
may choose a line by pressing
LINE 1 or LINE 2 before
or after you choose your calling method.
To preview a telephone number before dialing, enter
digits before choosing your calling method.
Press
CLEAR to make corrections as you enter digits.
To hang up, replace the corded handset, press SPEAK-
ERPHONE
or press HEADSET.
Last number redial
Select
RDL to view the last 5 numbers called (up to 32
digits each). Use the
^V buttons to highlight a num-
ber, then press
LINE 1 or LINE 2 to dial. Select SELECT
then ERASE to delete this number from the redial mem-
ory, or SELECT and then SAVE to copy it into your
directory (see page 21).
Mute
During a conversation, select
MUTE to silence the
microphone. You will see MICROPHONE MUTED in the
display and the MUTE indicator will light. You will be
able to hear, but your caller will not be able to hear
you until you select
MUTE again to resume speaking.
To Next Page
Loading...
Need help?
General
