About Your Calling Group Supervisor
Telephones
7.
8.
9.
10.
11.
12.
13.
Select
Auto Dial[AutoD].
Select
Inside.
Select
Enter.
Dial the extension number.
Select
Enter.
Repeat Steps 5 through 11 to program additional
buttons.
Press
Home.
To Program an Agent Button on
Supervisor Analog Multiline
Telephones
1.
2.
3.
4.
5.
6.
7.
Label the button to be programmed with the agent’s
name or extension.
Slide the
T/P
switch to the
P
position.
Press the button labeled with the agent’s name or
extension.
Dial
*22
.
Dial the extension number.
Repeat Steps 3 through 5
to program additional
buttons.
Slide the T/P switch to the center position.
Programming a Telephone
2-21
To Next Page
Loading...
